Avocent Network Card SST 8P User Manual

Quick Installation Guide  
SST PCI Adapters  
SST-4P and SST-8P Multiport Serial PCI Adapters  
The following will help you to install SST  
PCI adapters and fanout cables.  
To install SST PCI adapters and fanout cables  
Should you require further assistance, please  
contact Avocent Technical Support.  
Overview  
FO4-DB Fanout Cable  
SST PCI Adapter  
SST-4P and SST-8P PCI adapters are  
intelligent, high-speed (up to 920k bps on each  
port) PCI expansion boards, which provide high  
performance serial I/O solutions for a PCI bus  
host computer. All port interfaces are standard  
RS-232, with full modem control and voltage  
surge protection on every pin.  
FO4-DB9 (PN 690367)  
FO8-DB9 (PN 690370)  
a) Set the host computer system  
power switch to OFF.  
b) Locate a free PCI expansion slot.  
c) Insert and secure the adapter  
firmly into the expansion slot.  
d) Replace the power cord and turn  
the host computer ON.  
SST PCI adapters appear to the system host  
processor as memory. That is, they are memory  
mapped devices. Each adapter is automatically  
mapped into system memory at the time of  
device driver installation.  
FO4-DB25 (PN 690369)  
FO8-DB25 (PN 690372)  
Software Installation  
2
Refer to the appropriate software documentation,  
located on your SuperSerial CD-ROM, for detailed  
device driver information.  
SST adapters occupy a PCI slot in the  
host computer and provide the intelligent  
functions to "off-load" the CPU from serial  
communications processing tasks.  
3
SST Fanout Cables  
FO4-DB9 (PN 690368)  
FO8-DB9 (PN 690371)  
SST-4 and SST-8 PCI adapters require a fanout  
cable (ordered separately). SST Fanout Cables  
(FOCs) provide four or eight RS-232 interfaces. The  
following diagrams illustrate pinouts and signals for  
DB-9, DB-25 and RJ-45 fanout cables.  
Hardware Installation  
1
Pin Functions  
Signal Name  
Use the following procedure to install your SST  
PCI adapter. As an alternative, you may follow  
the installation instructions presented in your  
host computer documentation.  
To Contact Avocent Technical Support:  
CALL (888) 793-8763 USA or 353-61-715292 Shannon, IR  
Avocent and the Avocent logo are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2006 Avocent Corporation. All rights reserved.  
 
590-650-501A  

3Com Gas Grill 45 0240 User Manual
Addonics Technologies Network Card AD4IN1EXC34 User Manual
Agilent Technologies Stereo System 6632B User Manual
Aleratec Fax Machine 310109 User Manual
Alpine Universal Remote RUE 4190 User Manual
Amana Furnace GUD X User Manual
American DJ DJ Equipment 700TM User Manual
Athena Technologies Speaker 3PAB005E User Manual
Audiovox Automobile Electronics CMOLF User Manual
Beko Refrigerator DN 156620 C User Manual